Am interested to know why two belay stakes have been placed at the top of Paradise Wall (HS 4b).
I can't think of any other reason they are there other than for belaying. I am struggling to understand the reasoning for placing belay stakes and anyone else using and relying on unknow fixed gear when there is an abundance of excellent easy to place (and remove) gear in the vicinity makes this even more bizarre.
Both are very short in length and one was dangerously loose pulling out with very little effort. The prevailing ethic is that fixed gear on Stanage is unacceptable. For these reasons and the abundance of alternative gear they have been removed.
Photo of stakes in place: see below or https://drive.google.com/file/d/1Ww2vW9h3v658quILLNmUVEqQ4XXhi-IO/view?usp=...
the follow photo (or photo below) https://drive.google.com/file/d/1N8FZP_Fk6bU1Xf2gwxJUF7rkFYIepZve/view?usp=... shows how short length these stakes are with a HMS karabiner for scale. Note the corrosion of the stake. Not sure how long have they been in place, I haven't led a route on this buttress since 2019 when I didn't notice them but I was in a bit of a rush. Anyone else recall them being there before?
For reference for the person who placed these stakes unnecessarily the following photo links demonstrate one of the many options for placing gear to make a safe belay without using the unnecessary stakes:
Excellent alternative gear on the right, a variety of nut sizes will fit in here safely: https://drive.google.com/file/d/1MWHhYamzkj-RjkU-zaErnl6P2bUhs5bP/view?usp=... There are further options using the perfect crack foreground of the following photo and in the trench visible to the right. https://drive.google.com/file/d/1N8JdANMiEvwvfcsajlOofnHuAMD-135x/view?usp=...
Excellent alternative gear on the left, a variety of nut sizes will fit in here safely: https://drive.google.com/file/d/1MT8t8arG8G8D_kN3zkKV1wrK0lEJuBPA/view?usp=... There are further options shown using the perfect crack visible in the the foreground of this photo: https://drive.google.com/file/d/1MT8dkQzq7MP4mN1rlhMcBm4Ut-TtaIgz/view?usp=...
Finally an equalised belay I was happy to abseil off: https://drive.google.com/file/d/1Mn6uQExagYviL0m6S63fUDGl0W3BPDZX/view?usp=...
I am happy to show you how to build safe belay anchors as we don't need any more unnecessary or dangerous stakes at Stanage.
Thanks, let's keep Stanage free of fixed gear.
Post edited at 16:50