UKH

Hi

I'm after a very narrow screwgate. By that I mean the distance between the spine and the gate opposite. Measured internally, hoping for 30mm. Any ideas?

Thanks 

Would a maillon work?

Or DMM do an accessory krab which is (from memory) 5KN, so not full strength but very strong.

Ocun Hawk Screw is pretty small and full strength. 53mm wide externally, so can't be far off 30mm internally. 

https://www.ocun.com/product/hawk-screw3

Thanks, i forgot to mention, it needs to be oval. Sorry 

Needs to be a screwgate. Thanks 

Anyway, tell us what it's for 🙂

DMM PerfectO? Don’t have one so can’t measure, but looks like it could be at least close - https://dmmwales.com/climbing-products/locking-carabiners/perfecto

Is it just for a training aid?

I use a steel maillon which I leave open (its not being used in a life or death situation, just as a training hanger). It's not even bent and I can still close it (with a spanner so might be a little bent!) 

Thanks, yes might just work. Just need to find one to play with 

I'm looking into solving a potential failure mode in a particular assisted belay device from the device's handle being held down inside the screwgate 

Take a look at Grivel SYM K9G Twin Gate.