Using a stainless steel flask on a stove.

New Topic
This topic has been archived, and won't accept reply postings.
 spartafan 06 May 2019

Hi,

I have a stainless steel thermos food flask and was wondering if I took the lid off it,could I heat the contents up on a gas stove?

I have this one : PKjSL_pAjQjFd4Y0qHLB9tnTXpSgUaAjbqEALw_wcB

Cheets

5
 jon 06 May 2019
In reply to spartafan:

Make sure it doesn't have foam in the vacuum part.

 Stichtplate 06 May 2019
In reply to spartafan:

You probably could, but the heat exchange would be so inefficient that any weight saved by not carrying a pot would be negated by the extra fuel consumption.

 Billhook 06 May 2019
In reply to spartafan:

A vacuum flask - I think you'll find the clue is in the vacuum.

 Hooo 06 May 2019
In reply to spartafan:

I had to laugh at this​, sorry.

The whole point of a vacuum flask is to stop heat getting from the inside to the outside and vice-versa. It you were looking for a way to put something​ on top of a stove without it getting hot, putting in in a vacuum flask would be your best bet!

Post edited at 20:27
OP spartafan 06 May 2019

Thanks for the replies.

Sorry, I forgot to say that the flask is now redundant, I don't have the lid and didn't want to throw it away.

So, was just wondering if I could have re utilised it.

2
 Stichtplate 06 May 2019
In reply to spartafan:

How are you fixed for vases?

OP spartafan 06 May 2019

Mmm, don't have any vases, but have Auntie Mable's urn.😀

 FactorXXX 06 May 2019
In reply to spartafan:

> Sorry, I forgot to say that the flask is now redundant, I don't have the lid and didn't want to throw it away.

Pierce the vacuum cavity and pour molten copper inside it.

 Timmd 06 May 2019
In reply to spartafan:

I think I might have pondered it in the past, but on taking the base off an old vacuum flask to look into removing a dent in it, I found that the base was glued on. There might be foam, glue, or inefficiency involved in the end.

 FactorXXX 06 May 2019
In reply to spartafan:

> Mmm, don't have any vases, but have Auntie Mable's urn.😀

Problem solved!
Put Auntie Mable in the flask and use the urn to cook with.

In reply to spartafan:

> Thanks for the replies.

> Sorry, I forgot to say that the flask is now redundant, I don't have the lid and didn't want to throw it away.

> So, was just wondering if I could have re utilised it.

As someone else pointed out, given that the design of a vacuum flask is almost solely to prevent heat ingress, of all the things you might re-utilise it for, a stove pot is the least likely do be of use.

In reply to spartafan:

> Mmm, don't have any vases, but have Auntie Mable's urn.😀

Switch the urn for the flask!

 Jon Greengrass 07 May 2019
In reply to spartafan:

you could make your flask into a stove

https://www.instructables.com/id/Backpacking-Gasifier-Stove/

 Andy Hardy 07 May 2019
In reply to spartafan:

You'll need to mount the flask on a turntable (or possibly a treadmill)

 Billhook 08 May 2019
In reply to spartafan:

I have a stainless steel pan.  Could I use it as a vacuum flask even with the lid?

Maybe I'm missing something but could you tell me how the heat is going to travel through the vacuum  (vacuum = no air, nothing = vacuum) with or without the lid?

You must have done or discovered how a vacuum insulates.  Haven't you?


New Topic
This topic has been archived, and won't accept reply postings.
Loading Notifications...