Triggers for Simond Naja Ice axes

New Topic
This topic has been archived, and won't accept reply postings.
 JonnySchofield 23 Nov 2014
Hi folks,

Just wondering if anyone had had any experience with fitting Simond Naja axes with triggers and which aftermarket ones fit?

THanks
 cragtyke 23 Nov 2014
In reply to JonnySchofield:

Petzl Trigrests fit really well, I've got them at the base of the shaft, just above the black plastic pommel, I cut the triggers down though. You could probably fit another higher up the shaft as well, above the rubber studs . Hardly any adjustments needed, I just used a couple of turns of pvc tape to bulk out the shaft a little for a better fit.
 Pina 23 Nov 2014
In reply to JonnySchofield:

http://www.camptocamp.org/articles/548385/fr/ajouter-une-cale-sur-piolet-si... may need to use google translate but a good page.
 cragtyke 23 Nov 2014
In reply to J_Trottet:

I'd not seen that before, but that's how I did mine, I found it useful to replace the triggers with some packing, or cut them down, otherwise the ends of the finger rest can splay out a bit when you tighten the nut.

New Topic
This topic has been archived, and won't accept reply postings.
Loading Notifications...